V
主页
拆解一些更便宜且劣质的智能手表 | Tearing down some more cheap and nasty smartwatches
发布人
YouTube In whch yr hmbl svt gets some more sub-$10 smartwatches ($4 and $6.50 respectively) and takes them apart to see what makes them tick. Figuratively. Turns out these things are based around some pretty decent hardware, much more so than the last LT716. Also, all three watches (these two and the LT716) use different CPUs! The expensive watch --- which was $6.50 when I bought it but is now $5 --- is actually pretty nice and might, with some work, be usable as a watch. -------- 在这一年里,您谦卑的仆人又入手了一些价格低于10美元的智能手表(分别为4美元和6.5美元),并将它们拆开看看是什么让它们运作。比喻地说。 结果显示,这些设备基于一些相当不错的硬件,远超上一款LT716。此外,这三款手表(这两款以及LT716)使用的是不同的CPU!价格较高的手表——我买时是6.5美元,但现在是5美元——实际上相当不错,经过一些工作后,可能真的能作为手表使用。 --------- https://www.youtube.com/watch?v=UbP68mEhnUg | 20240703
打开封面
下载高清视频
观看高清视频
视频下载器
将CP/M移植到Brother SuperPowerNote Z80笔记本电脑事务上
造一个这样的 3D 打印机比看上去容易
与机械工程师一起设计电子设备外壳 | Design Electronics Enclosures with a Mechanical Engineer
忘了树莓派吧!用你的旧手机代替。 | Forget About Raspberry Pi! Use Your Old Phone Instead.
当3D打印遇见电子:8个杰出项目! | When 3D printing meets Electronics: 8 Brilliant Projects!
让我们使用LilyGo T-Display S3和OpenWeatherMap.org制作廉价的互联网气象站。
电子纸墙 3.0 | E-Paper Wall 3.0
制作一个漂浮显示器 | Making a floating display
使用普通的烙铁,在3D打印件上完美预埋黄铜螺母!
300mm voron 6工具头 | 300mm 6 tool stealthchanger
如何将USB HID设备用作Arduino输入 - 键盘、鼠标、磁条/条码阅读器等!
将Fnirsi DSO152迷你示波器改装以玩打砖块游戏
DIY 一个小键盘 | Building a tiny keyboard
创建自己的相控阵波束形成器 | Build Your Own Phased Array Beamformer
将BMD Speed Editor键盘改造成X11宏键盘
铝型材双人床
USB设备发现是如何工作的? | How does USB device discovery work?
您的3D扫描效果很差?试试这个!(Creality Raptor 专场)
Hack 一项古老的技术! | HACKING a piece of ancient technology!
故障的 Starlink 无线路由器 | 我能修理它吗? | Faulty Starlink Wireless Router | Can I Fix It?
人工智能设计了这款轴向磁通电机。 | AI designed this Axial flux motor
最快的!使用ESP32开发板进行语音转文字转换 🔥🔥
AirPod外壳带显示屏? 拆解时间 | AirPod Case with Display? Teardown time
不再硬编码Wifi和时区数据 - 为朋友编程个性化时钟
苹果 AirTags 是如何被黑客攻击的 | How the Apple AirTags were hacked
制表:加工手表的心脏 | Watchmaking: Machining the Heart of a Watch
硬件定时器是如何工作的? | How do hardware timers work?
一个巧妙的1960年代内存技巧如何改变了计算机技术 | How a Clever 1960s Memory Trick Changed Computing
DIY AR 眼镜侧装 2.1 | Sideloader 2.1
倾角仪 - 你 - 可以制作 | Inclinometer -YOU- can make
使用 Rust 连接到 UART 串行设备 | Connecting to an UART serial device using Rust
0101:取指令寄存器仿真与PCB设计 | 从零开始的16位计算机
用DIY HID设备(包括Rubber Ducky / Bad USB)远程控制PC和智能手机
尝试制作一个世界时钟 | I tried to make a world clock.
每个创意人士都应该拥有的3D打印球形虎钳 | The 3D Printed Ball Vise Every Creative Should Own
#386 如何测量ESP/Arduino的低电流?功率剖析仪、Otii、µCurrent Gold、Joulescope
我的面包板电脑的简单 BIOS | A simple BIOS for my breadboard computer
电力电子学中的各类电容器进行比较和分析
T-Display S3 PRO - 用于远程控制的出色 ESP32 设备
建造低于250克的自动无人机,采用Ardupilot和ExpressLRS AirPort遥测技术。