V
主页
搬运-硅胶皮肤制作及特殊效果制作参考-How To Make A Fake Bloody Hand Prop Using Alja-Safe and Drago
发布人
youtube.com
打开封面
下载高清视频
观看高清视频
视频下载器
搬运-硅胶皮肤制作及特殊效果制作参考-如何制作用于博物馆展示的犀牛模具
搬运-3小时超长待机-Smooth-On公司 出品的硅胶使用技巧以及注意事项-人形机器人脸部身体硅胶仿真皮肤制作参考视频
搬运-参考视频-RC液压缸仿真-使用N20电机制作
“烂尾工程”行动正式启动,3D打印制作的99坦克开始进行组装,看完你会浪费人生中毫无意义的25分钟。
“烂尾工程”经过原型车打印主体,遥控电子设备测试通过,开始用慢速高精度打印制作一个漂亮的99A坦克了!底盘拆分打印和固定方式与钢丝扭杆相结合
“烂尾工程”99B的扭杆悬挂制作和安装,3D打印eptg耗材强度和韧度比PLA感觉要好一点
“烂尾工程”底盘和炮塔驱动完成,网友说打印件不耐用,所以特意做了2个小时的耐久性测试,效果还行
3D打印制作99B坦克,模型来自网友分享,TPEG耗材好难搞(又挖了一个新坑)
学渣建模3D打印履带式小车-04-动力总成完成,打算试机一两个小时,看下履带和各个部件耐久性。效果很棒!满意!
小树corexy3D打印机自制8通道遥控中国59式坦克记录N+7天-打印履带精度不够,针线来凑-履带制作过程
小号手59坦克1:35比例底盘使用原装减速箱静改动
学渣建模3D打印履带式小车-03悬挂和履带打印出来拼装,效果很好,特别是履带,很满意
动雕结构参考视频系列-人头Animatronic Head_ Work in Progress
中国59式坦克制作新手的一期水视频---新手使用DIY风格的打印机实在是太多技术痛点了
(野生搬运工)Allen Bradley-Rockwell罗克韦尔(AB)PLC 第5讲 利用RSLinx Classic建立通讯
小树corexy3D打印机自制8通道遥控中国59式坦克记录N+6天-炮塔360°无限旋转的集电环(取电滑环)制作过程
小树corexy3D打印机自制8通道遥控中国59式坦克记录第4天--严重翻车,打印59式坦克主车体错层严重,一晚进度0
学渣建模3D打印履带式小车-02悬挂方式更改,履带打印精度和尺寸大小很合适,使用0.5mm钢丝进行连接
科视放映机4230更换灯泡操作流程
(野生搬运工)Allen Bradley-Rockwell罗克韦尔(AB)PLC第3讲 Logix平台的标签结构
小树corexy3D打印机自制8通道遥控中国59式坦克记录N+6天-8通道整机接线测试电气线路并试机测试
Autodesk CAD2014版本-新手画二维图画三维图导出PDF文件-车轴敲击工装-倍速观看效果更佳
动雕结构参考视频系列-眼睛结构
激光超声模拟-PZFlex超声_换能器_探头_无损检测_电磁超声_聚焦
被霸凌后他决定,用校霸的老婆帮自己生个孩子
逆向STL文件的ZTZ99A坦克为可编辑的实体文件--3D打印后静改动--手残学渣日常记录3
逆向STL文件的ZTZ99A坦克为可编辑的实体文件--3D打印后静改动--手残学渣日常记录7--插入图片比对,整个比例都是错的
小号手59式坦克静改动的“原厂”减速箱润滑油品:大宝SOD 蜜护手霜,便宜好用不脏手
逆向STL文件的ZTZ99A坦克为可编辑的实体文件--3D打印后静改动--手残学渣日常记录4
4块钱成本的自制集电环又不是不能用,标准件:垫片+电刷铜片+公母插线缆+4mm螺丝和轴承搞定,360°旋转不搅线缆
直观解密-相控阵08-相控阵-45°聚焦在20mm半声程--视频来源:由Ed Ginzel制作完成
小树corexy3D打印机自制8通道遥控中国59式坦克记录第3天-玄学驱动轮打印5个只成功1个!
(野生搬运工)Allen Bradley-Rockwell罗克韦尔(AB)PLC 第7讲 控制器的数据类型
【日恐】班里新转来了个大佬,据说人挡杀人佛挡杀佛。。
学渣建模3D打印履带式小车-01-悬挂驱动系统建模
(野生搬运工)Allen Bradley-Rockwell罗克韦尔(AB)PLC 第8讲 数组及自定义结构体的创建
(野生搬运工)Allen Bradley-Rockwell罗克韦尔(AB)PLC 第10讲 使用RSLogix Emulate 5000仿真软件
<野生搬运工> 野生搬运一起学习拆装电容器时如何人工放电
夏天太热!帐篷、床车驻车空调降温空调DIY试做。既想要空调降温也想要热水泡脚。
新坑开挖-武器站-arduino wemos D1开发板+L298N控制直流电机,手机wifi控制的可视武器站新坑完成6足驱动机械设想验证