V
主页
IPM电机设计(13.4)Maxwell定子冲片参数化建模2(draw a stator lamination2)
发布人
打开封面
下载高清视频
观看高清视频
视频下载器
IPM电机设计(14.1)Maxwell转子参数化建模-建立相对坐标系(draw a rotor core)
IPM电机设计(13.3)Maxwell定子冲片参数化建模1(draw a stator lamination1)
空心杯绕组3D模型及其资料
IPM电机设计(24)Maxwell电机额定转矩的计算(Calculation of rate torque)
IPM电机设计(2.6)定子槽数的选择(selection of the number stator slots 2.6)
IPM电机设计(6.5)定子齿部磁通的计算(calculation of stator tooth flux6.5)
IPM电机设计(6.4)定子齿宽的计算(calculation of width of stator tooth 6.4)
IPM电机设计(7.3)定子槽面积的计算(calculation of stator slot area67.3)
IPM电机设计(13.5)Maxwell定子冲片参数化建模3(draw a stator lamination3)
齿槽转矩专题(1)解析表达式和周期
IPM电机设计(6.6)定子槽肩宽的计算(calculation of width of stator slot shoulder 6.6)
基于ANSYS Electronics(maxwell)的轴向磁通电机设计(盘式电机)(14)双定子双转子转矩比较
电机定子制作流程(裁剪、冲槽、绝缘、绕线、绑扎)
基于ANSYS Electronics(maxwell)的轴向磁通电机设计(盘式电机)(8)实例1三维模型仿真
基于maxwell的涡流场仿真
基于ANSYS Electronics(maxwell)的轴向磁通电机设计(盘式电机)(15)电机参数的计算
IPM电机设计(7.5)定子槽高和槽宽的计算(calculation of stator slot dimension7.5)
IPM电机设计(26.1)Maxwell电机功率因数的计算( Calculation of power factor)
IPM电机设计(16.2)Maxwell查看电机气隙磁密2(Calculation of the magnet loading)
基于ANSYS Electronics(maxwell)的轴向磁通电机设计(盘式电机)(13)电机MAP图
新手学振动噪声分析(2)机壳建模
Maxwell+matlab联合仿真(5)simplorer+SVPWM矢量控制模型1、目前还有问题
IPM电机设计(18.1)Maxwell电机电负荷的计算1(Calculation of the Electrical loading)
IPM电机设计(4.2)电压和电流计算(calculation of voltage and current4.2)
磁场调制式电机和磁齿轮对比
IPM电机设计(15.3)Maxwell电机零部件材料设置-用记录脚本设置永磁体材料2(set material of magnet)
Maxwell永磁体退磁仿真设置(3)温度和外部磁场的影响
Maxwell永磁体充磁方向设置汇总
电机中的损耗(2)铜耗的计算
IPM电机设计(1)课程介绍(Introductory course on design of V-Type IPM motor.1)
齿槽转矩专题(2)极槽配合的影响及其仿真1
齿槽转矩专题(6)斜极斜槽的影响及其仿真
IPM电机设计(19.1)Maxwell电机BH曲线研究1(Demagnetization study)
Maxwell+matlab联合仿真(3)Maxwell添加内部激励的方式、转矩角、功角和功率因数角
IPM电机设计(17)Maxwell优化磁负荷(Optimization of magnetic loading)
IPM电机设计(8.2)有效磁通面积的计算(calculation of flux area8.2)
IPM电机设计(9.4)卡特系数的计算4开口槽仿真(calculation4 of carters coefficient 9.4)
Motor-CAD资料及其应用指南
Maxwell永磁体退磁仿真设置(2.2)外部磁场的影响(故障短路)
IPM电机设计(12)极槽配合对电机参数的影响(slot pole combination)