V
主页
IPM电机设计(6.3)齿头高和齿肩高的计算(calculation of stator tooth tip and shoulder6.3)
发布人
大佬已授权,制作不易,请多支持,谢谢大家。
打开封面
下载高清视频
观看高清视频
视频下载器
轴向磁通PCB电机和PCB绕组
IPM电机设计(2.7)线电压计算(Motor line to line terminal voltage 2.7)
IPM电机设计(2.6)定子槽数的选择(selection of the number stator slots 2.6)
永磁电机转子永磁体嵌入工艺
IPM电机设计(7.2)绕组匝数的计算(calculation of turns7.2)
IPM电机设计(5.1)电机输出功率方程的计算(output power equation of motor 5.1)
IPM电机设计(13.4)Maxwell定子冲片参数化建模2(draw a stator lamination2)
电动机常用极槽配合及其绕线方式
Maxwell永磁体退磁仿真设置(2.1)外部磁场的影响
IPM电机设计(4.2)电压和电流计算(calculation of voltage and current4.2)
基于ANSYS Electronics(maxwell)的轴向磁通电机设计(盘式电机)(8)实例1三维模型仿真
IPM电机设计(7.5)定子槽高和槽宽的计算(calculation of stator slot dimension7.5)
电机中的损耗(1)主要损耗的计算
IPM电机设计(5.3)电磁负荷计算(calculation of electrical loading and magnetic loading5.3)
Maxwell仿真halbach永磁体阵列设置汇总
IPM电机设计(6.2)定子槽口宽度计算(calculation of stator slot opening6.2)
多目标优化平台platemo3.5
IPM电机设计(5.4)关键尺寸计算(calculation of main dimensions5.4)
基于ANSYS Electronics的轴向磁通电机设计(1)基本参数的确定
2D电磁软件 FEMM 单个永磁体仿真
IPM电机设计(5.2)输出常数计算(calculation of output constant5.2)
IPM电机设计(3.1)初始设计之变量分类(Classification of variables 3.1)
空心杯绕组3D模型及其资料
IPM电机设计(13.3)Maxwell定子冲片参数化建模1(draw a stator lamination1)
直线电机设计(2)3D建模练习
IPM电机设计(18.3)Maxwell电机电负荷的计算3设置电流激励(Calculation of the Electrical loading)
IPM电机设计(1)课程介绍(Introductory course on design of V-Type IPM motor.1)
电机定子制作流程(裁剪、冲槽、绝缘、绕线、绑扎)
轴向磁通电机计算公式(正弦波-直流)
IPM电机设计(18.2)Maxwell电机电负荷的计算2(Calculation of the Electrical loading)
IPM电机设计(20)Maxwell电机静力矩的计算(calcultion of static torque)
电机中的损耗(4)永磁体中的涡流损耗
IPM电机设计(18.4)Maxwell电机电负荷的计算4设置电流激励(Calculation of the Electrical loading)
树脂封装绕组定子轴向磁通电机制作和测试
基于ANSYS Electronics(maxwell)的轴向磁通电机设计(盘式电机)(7)实例1参数计算及磁路建模
IPM电机设计(7.3)定子槽面积的计算(calculation of stator slot area67.3)
IPM电机设计(14.4)Maxwell转子参数化建模-建立永磁体(draw magnets)
基于ANSYS Electronics(maxwell)的轴向磁通电机设计(盘式电机)(14)双定子双转子转矩比较
Maxwell+matlab联合仿真(6)simplorer+SVPWM矢量控制模型2还需要调整
IPM电机设计(16.2)Maxwell查看电机气隙磁密2(Calculation of the magnet loading)