V
主页
IPM电机设计(8.5)BH曲线的计算(calculation of BH carve8.5)
发布人
打开封面
下载高清视频
观看高清视频
视频下载器
IPM电机设计(5.2)输出常数计算(calculation of output constant5.2)
IPM电机设计(8.6)永磁体工作点的计算(calculation of magnet working point8.6)
IPM电机设计(26.1)Maxwell电机功率因数的计算( Calculation of power factor)
IPM电机设计(24)Maxwell电机额定转矩的计算(Calculation of rate torque)
IPM电机设计(7.1)反电动势的计算(calculation of back EMF7.1)
IPM电机设计(8.6+8.7)永磁体工作点的计算2(calculation of BH carve8.6+8.7)
Maxwell永磁体退磁仿真设置(1)永磁体材料特性
IPM电机设计(6.4)定子齿宽的计算(calculation of width of stator tooth 6.4)
IPM电机设计(18.4)Maxwell电机电负荷的计算4设置电流激励(Calculation of the Electrical loading)
IPM电机设计(18.3)Maxwell电机电负荷的计算3设置电流激励(Calculation of the Electrical loading)
IPM电机设计(7.2)绕组匝数的计算(calculation of turns7.2)
Maxwell+matlab联合仿真(1)Maxwell电机参数+PI控制模型
IPM电机设计(14.1)Maxwell转子参数化建模-建立相对坐标系(draw a rotor core)
IPM电机设计(18.1)Maxwell电机电负荷的计算1(Calculation of the Electrical loading)
IPM电机设计(4.1)输入功率计算(calculation of input power 4.1)
IPM电机设计(18.2)Maxwell电机电负荷的计算2(Calculation of the Electrical loading)
IPM电机设计(20)Maxwell电机静力矩的计算(calcultion of static torque)
IPM电机设计(8.2)有效磁通面积的计算(calculation of flux area8.2)
IPM电机设计(13.6)Maxwell定子绕组参数化建模(draw a stator winding)
IPM电机设计(16.1)Maxwell电机磁负荷的设置1(Calculation of the magnetic loading )
IPM电机设计(21)Maxwell电机转矩map的计算(Calculation of torque map)
IPM电机设计(16.2)Maxwell查看电机气隙磁密2(Calculation of the magnet loading)
IPM电机设计(19.3)Maxwell电机BH曲线研究3(Demagnetization study)
IPM电机设计(8.3)高斯定理的计算(calculation of Gauss's theorem8.3)
IPM电机设计(6.6)定子槽肩宽的计算(calculation of width of stator slot shoulder 6.6)
IPM电机设计(5.4)关键尺寸计算(calculation of main dimensions5.4)
IPM电机设计(25)Maxwell电机凸极比计算( Calculation of saliency ratio and output torque)
IPM电机设计(15.4)Maxwell电机零部件材料设置-用记录脚本设置永磁体充磁方向(set direction of magnetization)
IPM电机设计(13.4)Maxwell定子冲片参数化建模2(draw a stator lamination2)
IPM电机设计(6.2)定子槽口宽度计算(calculation of stator slot opening6.2)
Maxwell永磁体充磁方向设置汇总
IPM电机设计(2.2)基本转速计算(Calculation of base speed 2.2)
IPM电机设计(15.1)Maxwell电机零部件材料设置-设置定转子铁芯(set material of motor)
Maxwell+matlab联合仿真(6)simplorer+SVPWM矢量控制模型2还需要调整
IPM电机设计(9.1)卡特系数的计算(calculation of carters coefficient9.1)
空心杯绕组3D模型及其资料
IPM电机设计(1)课程介绍(Introductory course on design of V-Type IPM motor.1)
电机设计相关的面试问题
基于Maxwell内置GA遗传算法的2维IPM电机模型参数建模优化
Maxwell+matlab联合仿真(3)Maxwell添加内部激励的方式、转矩角、功角和功率因数角